Solar ATM Solution
 
Renewable Energy Division
 
Aviation Battery Solutions (Red Box)
 
Batteries
 
Batter water management system
 
Industrial Battery with remote monitoring
 
LED Solutions
 
Aircap
 
 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
  Industrial Batteries  
     
     
 
Exide is a dominant player in the Industrial Battery segment, with a product range covering capacities from 2.5 Ah to 10,000 Ah and more.
 
     
 

Using the latest technological inputs to manufacture industrial batteries for the power, telecom, infrastructure projects, computer industries, as well as the railways, mining and defence sectors.

The Our product range includes both Flooded type Lead Acid batteries and Sealed Maintenance Free (SMF) VRLA type ,in the Mono block and 2V range to meet most applications needs. VRLA batteries are manufactured in Technical Collaboration with Shin Kobe - Japan Manufacturers of Hitachi Range of Batteries.

  
     
 
There is a continuous process of developing new products and enhancing existing products in our R&D Center at Kolkata.

All the above specific areas are well administered by a strong group of human assets. The qualified R&D personnel including Ph. D.'s in Engineering / Applied Sciences design and innovate in following functional areas:
 
     
 
Battery Design & Development
Process Development
Tool Design & Development
Alloy Development
Development of Plastic Components
Hard Rubber / Soft Rubber Components Development
Analytical Services
Battery Testing & Quality Assurance
Environmental Health Monitoring
 
     
  There is a battery for every applications:  
     
 
Plante for long life and high performance
NDP/HDP for sub-stations and UPS
EP/EPST Maintenance free batteries (VRLA)
Inva series for inverters and UPS, SOHO applications
Traction batteries for battery operated fork-lifts
 
     
     
1 VRLA BATTERIES  
     
 
  A) EXIDE POWERSAFE
  B) CHRORIDE SAFEPOWER & DRAGON
 
     
2 TABULAR BATTERIES  
     
 
  A) EL TABULAR STANDBY BATTERIES
  B) ELF - EXIDE LITE
 
     
3 TWOHOLD STANDBY CELL  
     
 
  A) Planet Standby Batteries
  B) Gauntlet Tabular Standby Batteries
 
     
4 INVERTER BATTERIES  
     
 
  A) INVA RED
  B) IT INVA TABULAR
  C) INVA QUEEN
  D) INVA KING
  E) INVA FLAT
  F) IN PLUS (INVERTER)
 
     
5 UPS BATTERIES  
     
 
  A) EXIDE EL Tabular Batteries
  B) SMF VRLA batteries (No free electrolyte)
 
     
   
     
1 VRLA BATTERIES  
     
 
  A) EXIDE POWERSAFE
    SEALED MAINTENANCE FREE BATTERIES
     
   
   
   
    POWERING THE CYBER WORLD  
   
     
   
Exide Powersafe, sealed maintenance free VRLA battery is a product of collaborative efforts of in-house R&D Industries Ltd., largest lead-acid battery manufactured of India and M/s Shin-Kobe Electric Machinery Co., Japan, the makers of world renowned Hitachi batteries. No wonder it is approved by all major OEMs and Institutional customers and is considered to be the Power of the future.
     
    FEATURES :
   
Sealed Maintenance free
Free from Orientation Constrains
Eco-Friendly
Easy Handling and No Installation Contrains
Ready-to-Use
Long Service Life
Low Self-Dischange
Excellent Charge Retention and Recovery Ability
Superior High-Rate Discharge
High Reliablity
Wide Range
     
    APPLICATIONS :
   
UPS System, Telecommunication Equipment, Solar Lantern, Emergency Light & Electronic Weighing Scale.
    ..........................................................................................................................................
   
  B) CHLORIDE SAFEPOWER & DRAGON
    MAINTANENCE FREE VRLA BATTERIES
     
   
   
    POWERING THE CYBER WORLD  
   
     
   
Presenting Chloride Safepower (7-12) & Dragon (4-6), sealed maintenance free VRLA batteries for you PC and emergency lights. These are the Products of in - house R&D efforts of Exide Industries Ltd., the largest lead-acid battery manufacturer of India .
     
    FEATURES :
   
Sealed Maintenance Free
Long Service Life
Free form Orientation Constraints
Low Self-Discharge
Eco-Friendly
Excellent Charge Retention and Recovering ability Recovering ability
Easy Handling and No Installation Constraints
Superipr High-Rate Discharge
Ready -to-Use
High Reliability
     
    APPLICATIONS :
    UPS Systems, Emergency Lights.
 
     
   
2 TABULAR BATTERIES  
     
 
   
 
A) EL TABULAR STANDBY BATTERIES
   
   
 
   
 
   
    POWERING THE CYBER WORLD  
   
   
 

EXTDE EL Tubular Standby lead acid batteries are specially designed for long life and economy, combined with the design of these batteries is backed both by our vast experience in the manufacture of industrial tubular plates and Exide Industries limited's unmatched experience of eighty years in the field of Stationary Standby battery application.

   
  FEATURES :
 
Long Life:5 to 7 years even on Regular deep cycling
Tubular Positive Plate
Heavy duty Terminals with Insulating Shrouds
Microporous Ceramic Vent plugs
Closed Top Float Guides for 6V Monobloc (exc Emergency Lighting ept 3EL 180)
Short First charge – Ready for Use in 12/24 Hours
Clean Environment – Free form Acid Fumes
Abuse Resistant
Topping –UP Frequency – Once in 9-12 Months for 6 Volts and 4-6 Months for 12 Volts Batteries
  ..........................................................................................................................................
 
B) ELF - EXIDE LITE
   
                                                                  
   
 
   
    THIKER PLATES, EXTRA LIFE  
   
   
  FEATURES :
 
Exide Lite, the longstanding popular battery for UPS systems now gets an extra long life.
   
 
Frequent Deep Discharge
 
The improved Exide Lite Challenger has been designed for deep discharge cycles during frequent powercuts while retaining the excellent original feature of high rate discharge.
Longer Life
 
Ultra thick positive and negative plates alongwith tough polyethylene based envelops separators form the core of this extremely rugged & reliable battery.
Low Maintenance
 
Low antimony alloy in the plate grids alongwith more electrolyte volume assures lower Maintenance needs.
Safe
 
Strong durable Polypropylele containers with heat terminals special vent plugs fitted with microporous ceramic domes to arrest pungent acidic fumes, making it particularly suitable for corporate office where an isolated place for the battery may not be available.
Compact / Less floor space
 
Compact, attractive and environment friendly fit to adorn any space in you home or office.
   
  APPLICATIONS :
 
UPS Systems
Domestic Inverters
EPABX
Alarm Systems
Emergency Lighting
Switchgear Operation in Substation
Solar P.V. & Wind Power
Genset Statiing Operation
   
 
   
3 TWOHOLD STANDBY CELL  
     
     
 
  A) PLANTE STANDBY BATTERIES
     
   
   
   
    PLANTE STANDBY BATTERIES  
   
     
    MAIN COMPONENTS :
     
   
1. Plante Positive Plates
 
Constructed of Ultra-pure lead (99.99%) to ensure least open circuit loss and no fall-off in capacity thourghout their long life.
   
2. Negative Plates
 
Pasted grid construction. Designed for balanced performance and life.
   
3. Separator
 
Sintered PVC providing a complete diaphragm between the plates. Seperators are inert chemically, have excellent oxidation resistance and their high degree of porosity ensures minimum internal resistance.
   
4. Containers
 
Mouulded from transparent Styrene Acrylonitrile (SAN) giving excellent clarity, outstanding chemical resistance, rigidity and toughness with very high insulating qualities which eleminate the need for seperate cell insulators. Transparency enables the electrolyte level and the cell condition to be monitored at a glance.
   
5. Cell Lids
 
Moulded from opaque SAN and sealed to the Container. Can be easily removed if the need for repair occurs.
   
6. Microporous Ceramic Vent Plugs
 
Specially designed incorporating a microporous ceramic filter which effectively returns all acid spray to the cell, but allows free exit of oxygen and hydrogen which is generated towards the end of boost charging.
   
7. High Conductivity Cell Pillars & Connectors
   
 
YHP range of cells are especially suited for high current duties (3 seconds to 1 hour) as they have tinned copper insert pillars and lead plated copper connectors as under :
     
    INITIAL CHANRGING INSTRUCTIONS
   
Charging may be commenced at any rate between the startig and finishing rates.

Once cell voltage reach 2.36V, reduce current to finishing rate and continue charging. Ensure that total Ah input however remains same..

If during any time of charging, temperature reaches 50 C, stop charging. Allow temperature to come down to 40 C and continue charging at finishing rate. Ensure total Ah input is maintained. If however, the time taken for the cell to cool down to 40 C is inordinately long, recharging may be started at 45 C.

Cells are considered to be fully charged once three sucessive hourly readings of cell voltage and electrolyte gravity are found to be constant. Hovever, the minimum toatl Ah input, as mentioned in the table must be provided to the cells even if the voltages and specific gravities are observed to be constant before that. On completion of charge adjust acid level to 'Maximum' after correcting specific gravity of electrolyte to 1.200+- 0.005 at 27 C.
    ..........................................................................................................................................
   
  B) Gauntlet Tabular Standby Batteries
     
   
   
   
    GAUNTLET TABULAR STANDBY BATTERIES  
   
    FEATURES :
   
1. Wide Range
 
Six (6) Plate sized i.e. TB, TV, TM, TL, TH and TTH types cater for a wide capacity range from 20 AH to 2500 AH.
   
2. Container
 
Hard rubber cell boxes conforming strictly to the requirement of IS : 1146 ARE USED FOR THE 20 TO 2500 AH range whist polypropylene plastic containers are also available for the 60 to 150 AH range. All are closed type cells having lids sealed with bituminous sealing compound.
   
3. Rugged Tabular Positive Plates
 
The positive active material is encased in a one-piece. Multi-tube woven Gauntlet of high tensile acid-resistant plyester. The polyester ‘Gauntlet' which is resin impregnated, combines high tensile strength with resilience and enables the electrolyte to penetrate freely whist acting as on effective retainer for the highly active material. It is also capable of withstanding the extreme stresses of expansion and contraction of the active material during regular charge/discharge encountered in service life.
   
4. Pasted Negative Plates
 
The pasted negative plates are designed to match the power and long life of the Tubular positive plates. The negative active material contains proprietary additives and special expanders for long life and peak power. It is retained firmly in place by sturdy grids designed to lock it in.
   
5. Electrolyte Level Indicator
 
Cells are fitted with robust easy-to-read electrolyte level indicator floats enclosed in transparent tube covers.
   
6. Microporous Ceramic Vent Plugs
 
Specially designed incorporating a microporous ceramic filter which effectively returns all acid spray to the cell, but allows free exit of oxygen and hydrogen which is generated towards the end of boost charging.
   
7. Microporous PVC or PE
 
High porosity separator form permanent insulating diaphragms between the plates and by virtue of their high porosity, low electrical resistance and excellent oxidation resistance serve as perfect separation medium.
   
8. Heavy Duty Terminals
 
Where high rate discharge is needed, the generous cross-section of the terminals provide maximum current.
   
9. Low Resistance Bolted Connectors
 
Bolted inter-cell connectors ensure easy installation and are mode from lead alloy or lead plated copper of generous cross-section for high current duties. All nuts, bolts and washers are lead plated for protection against corrosion and sulphation.
   
 
     
   
4 INVERTER BATTERIES  
     
     
 
  A) INVA RED
     
   
   
   
The Red Tabular Powerful Inverter Battery  
   
     
    .........................................................................................................................................
   
  B) IT INVA TABULAR
     
   
   
   
TABULAR BATTERIES FOR INVERTER  
   
    FEATURES
   
1) 3rd. Generation tabular technology
2) Low maintenance along with flooded design
3) Deep cycle design
4) Abuse resistant
5) Tower type design
6) Common Side Venting
     
    ADVANTANGES
   
1) Very long life
2) Once in a Year topping-up
3) Suited for use in areas of frequent power cut (800 to 1000 cycles of deep discharge as against 400 cycles of other batteries.)
4) Can withstand overcharge batter
5) Occupies less floor space, Totally new look
6) Less pollution, Environment Friendly
    .........................................................................................................................................
   
  C) INVA QUEEN
    - Thiker Plates - Extra Life
     
   
   
   
THE QUEEN OF BATTERIES  
   
   
The ‘Invaqueen' range of batteries for Inverters come with rugged internal elements necessary for high-rate discharge performance. It is housed in a light-weight, durable, beautiful polypropylene container, making it the Queen of all inverter batteries. The owner can proudly display her in the living room. The thick plates ensure a long life and through partition inter-cell connections ensure an even better voltage profile on discharge-the result : long duration steady discharge during power cuts and long service life.
     
    ADVANTAGES :
     
   
Customised exclusively for inverters
Suited for frequent and long power cuts
Quick recharge
Dry charged plates for quick initial charge
Expected life-2 year plus-under arduous conditions
Easy maintenance
    .........................................................................................................................................
   
  D) INVA KING
    - Inva King Jahan Roshni Wahan
     
   
   
   
INVA KING JAHAN ROSHNI WAHAN  
   
     
    SPECIAL FEATURES :
     
   
Extra heavy duty thicker plates as per exclusive Exide design ensuring durability, resistance to corrosion and inbuilt margins for high ambient temperature
Strong and rugged polypropylene contrainer.
Build with PE pocket type separator bonded with glass mat for extra support to active material material, making the battery more suitable for deep cycle application.
Suitable for frequent and long power cuts with quick recharge adaptability.
Heat-sealed tamper proof lids, with rugged polypropylene build-in handle for easy lifting arrangement.
Substantial savings in weight and floor area.
Low maintenance characteristics.
Low self discharge.
    .........................................................................................................................................
     
   
  E) INVA FLAT
     
    .........................................................................................................................................
   
  E) IN PLUS (INVERTER)
     
   
Model Warranty Capacity
IN PLUS (INVERTER) 18 Mths Warranty 12 V130Ah To 200Ah
 
     
5
UPS BATTERIES
  
     
 
 
 
A) EXIDE EL Tabular Batteries
   
   
 
   
 
   
    THE EXTRA POWER UPS BATTERY  
   
   
 

Tubular batteries use a special technology by which the active material is encapsulated in polyester tubes to prevent 'shedding'. The electrode geometry facilities 'cyclic' deep discharges i.e. long repetitive power outages They are recommended for back up power for UPS where environmental conditions are tough and high ambient temperatures are common. Exide , for more than 25 years now, has been manufacturing the unique "Exide EL" range of tubular products which has proved to be the most reliable source of back up power for inverters and UPS operating under demanding conditions. These are capable of long hours of backup.
   
  BENEFITS :
 
The float life of Exide EL extends well beyond 5 year (Avg. 5-8 years)
The cyclic life of EL is also very high to the tune of 1200 cycles at 80% depth of discharge.
The low antimony content of the spines ensures a very low self discharge loss of the order of 1% of the 10 hour rate capacity per week at 25%.
The combination of low antimony alloy and ceramic vent plug keeps the water addition requirement very low. A topping up frequency of once in 6-9 months can easily be achieved in normal operating conditions.
 
 
   
   
   
  ..........................................................................................................................................
 
B) SMF VRLA BATTERIES (No free electrolyte)
   
                                                                  
   
 
   
    POWERING THE CYBER WORLD  
   
   
 
VRLA batteries are flat plate batteries which do not require periodic topping-up with water and normally do not emit any fumes or gases on a continuous basis.They are best suited for applications where back up requirement is usually short, normally not exceeding 30 mins to 1 hour. They are the automatic choice where ambient temperature is not very high and space is a constraint. Exide's Powersafe VRLA batteries are a superior range of products that provide ideal back up power for UPS power.
   
  FEATURES:
 
VRLA batteries do not need periodic service or topping up.
If there is a major space constraint or a restriction on battery emissions the VRLA has to be the automatic choice.
Used for short durations backups not exceeding 1 hour.
   
   
 
   
   
 
   
   
 
   
   
 
     
     
  --------------------------------------------------------------------------------------- ---  
 
       
 
Home | About us | Products | Associates | Contact Site designed & developed by Webz Solutions™
Copyright 2006, AUTONIC ENERGY SYSTEMS PVT. LTD.