Solar Inverter
Autonic iPower Series Power Conditioning Units

What is Autonic iPower Series Power Conditioning Unit?
Autonic iPower Series Power Conditioning Unit Complete solar power solution.
Pure sine wave-high frequency switched PWM inverter using toroidal core transformer for high overload capacity.
Absolutely no noise during operation and in loads, Utility grade output power quality.
Load operation optimized for solar energy utility.
Combined solar and grid charge with intelligent energy management and max solar energy utility by turning off grid charger if solar charger is ON.

Model Autonic iPower Series – Bidirectional- Pure Sine Wave
Solar Input Input voltage range 40-56V DC
Solar array voltage Max Voc 90VDC
Continuous power 1600W
Battery Nominal battery voltage 48V
Max. battery voltage Shut off @ >1.33 x V nom – Automatic restart @ < V max
Battery type select VRLA and Flooded
Solar Charger Type PWM float
Solar charger Current Max 40 A
Grid Grid Charging Capacity 15 A Max
Detection of the load 8W min
Output voltage Sine wave 230V
Frequency 50Hz.
Distortion THD (resistive load) <5% at Pnom
Protection Overheat protection (+/-5°C) Shut down Shut down @75°C-Auto-restart @ 70°C
Overload and short circuit protection Automatic disconnection with 5 time restart attempts
Reverse polarity protection Hardware enabled – No fuse blow
Deep discharge battery protection Shut off @ 0.87 x V nom – Automatic restart @ V nom
Temperature compensation Cold-warm-hot levels
Display LCD Display 2 X 16 character display with auto back light
Features Intelligent Control
Grid Interaction
Password protected user settings
Indications & Alarms Battery low warning level
Battery low disconnect level
Grid Charger FLOAT level
Battery low change over to Grid in timer mode
Inverter AC output voltage setting
Grid Charging current level
Solar charger float level
Solar charger minimum current for grid Charger ON
Grid window – wide and narrow level
Enable disable no load shutdown
Overload restart enable disable for narrow mode operation
Set RTC date and time.
Set ON and OFF time for backup operation
Monitoring Parameter Grid Charging current level
Solar charger float level
Solar charger minimum current for grid Charger ON
Grid window – wide and narrow level
Enable disable no load shutdown
Overload restart enable disable for narrow mode operation
Set RTC date and time
Set ON and OFF time for backup operation